How Many FPS Does NARAKA: BLADEPOINT Get with RX 590? Performance at 1080p, 1440p & 4K

47FPS

1080p UltraEstimated

amazonAffiliate link

Want the RX 590 at the best price?

Check the current price on Amazon.

View on Amazon →

NARAKA: BLADEPOINT system requirements

Official minimum and recommended requirements published by the developer.

Minimum

CPUIntel i5 4th generation or AMD FX 6300 or equivalent

GPUNVIDIA GeForce GTX 750TI, Intel Arc A380, AMD HD 6950 or equivalent

RAM8 GB RAM

Storage55 GB available space

RX 590 Specifications

BrandAMD

VRAM8 GB

Power Draw (TDP)225W

TierMid-range

Benchmark26

1080p (Full HD)26/100

These are the basic specs. The full RX 590 page adds the rest of the technical data and its FPS game by game, not just in NARAKA: BLADEPOINT.

See all FPS and specs for the RX 590

Want the exact NARAKA: BLADEPOINT FPS with your RX 590?

These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.

Estimate tailored to your rig
Customize resolution, quality, and RAM

Calculate with my CPU & RAM

NARAKA: BLADEPOINT benchmark on RX 590: FPS by resolution and quality

What is your processor?

Pick yours and we recalculate the whole table above with it.

Intel Core i5-13400

Check Intel Core i5-13400 price →

NARAKA: BLADEPOINT FPS with a RX 590 and a Intel Core i5-13400

Ultra

1080p

47FPS

min 41Acceptable

1440p

30FPS

min 27Acceptable

12FPS

min 11Unplayable

High

1080p

61FPS

min 54Good

1440p

40FPS

min 35Acceptable

16FPS

min 14Poor

Medium

1080p

80FPS

min 70Good

1440p

52FPS

min 46Acceptable

21FPS

min 19Poor

Low

1080p

104FPS

min 91Good

1440p

67FPS

min 59Good

27FPS

min 24Poor

Bottleneck (estimated)

1080pGPU 24%

1440pGPU 51%

4KGPU 80%

Quality	1080p (Full HD)	1440p (2K)	4K (Ultra HD)
Ultra	47FPS min 41Acceptable	30FPS min 27Acceptable	12FPS min 11Unplayable
High	61FPS min 54Good	40FPS min 35Acceptable	16FPS min 14Poor
Medium	80FPS min 70Good	52FPS min 46Acceptable	21FPS min 19Poor
Low	104FPS min 91Good	67FPS min 59Good	27FPS min 24Poor
Bottleneck (estimated)	GPU 24%	GPU 51%	GPU 80%

The percentage estimates how much of the stronger component's capability goes unused because of the other one.

This one does matter: from the AMD Ryzen 5 3600 downwards the processor becomes the brake on the RX 590. There is 9% between the slowest and fastest CPU in the table. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.

FSR performance: FPS with AI upscaling

Upscaling renders NARAKA: BLADEPOINT at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the RX 590 with FSR enabled, starting from its native Ultra FPS.

Resolution	Native	FSR Quality	FSR Performance
1080p	47	59	68
1440p	30	41	50
4K	12	17	22

About ray tracing: every figure on this page is with ray tracing off. The RX 590 has no dedicated hardware for it, so it is an option best left disabled.

Estimated figures. The real gain varies by game and by the version of the technology.

Is the CPU or the graphics card holding you back?

These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.

Here the graphics card is the brake: the RX 590 is what caps the frame rate in NARAKA: BLADEPOINT. A faster processor would hardly change the result.

The CheckFPS verdict

Analysis based on real in-game FPS, not spec sheets

Is the RX 590 Enough for NARAKA: BLADEPOINT?

The RX 590 delivers 47 FPS at 1080p Ultra in NARAKA: BLADEPOINT. Performance is acceptable but not ideal. Consider lowering the resolution or quality.

At 1440p it gets 30 FPS and at 4K 12 FPS at Ultra quality.

This GPU does not reach 60 FPS at 1080p Ultra

⚡ Optimization guide

Want more FPS in NARAKA: BLADEPOINT?

Our guide collects the settings that give between +40% and +90% FPS in NARAKA: BLADEPOINT with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.

View optimization guide for NARAKA: BLADEPOINT →

RX 590 or GTX 980 Ti for NARAKA: BLADEPOINT?

In NARAKA: BLADEPOINT at 1080p Ultra both land on the same figure: 47 FPS. Price and power draw are what separate them.

RX 590 vs GTX 980 Ti: which one is faster?

Other GPUs for NARAKA: BLADEPOINT

RX 5600 XTAMD 6GB

62FPS

1080p Ultra

View analysis Check price

GTX 1070 TiNVIDIA 8GB

60FPS

1080p Ultra

View analysis Check price

GTX 1660 SuperNVIDIA 6GB

60FPS

1080p Ultra

View analysis Check price

RTX 3050NVIDIA 8GB

60FPS

1080p Ultra

View analysis Check price

GTX 1660 TiNVIDIA 6GB

58FPS

1080p Ultra

View analysis Check price

GTX 1070NVIDIA 8GB

55FPS

1080p Ultra

View analysis Check price

If none of these convinces you for NARAKA: BLADEPOINT, the full ranking sorts all 143 cards by real FPS, not synthetic scores.

See the full graphics card ranking by real FPS

Other games with RX 590

Frequently asked questions about NARAKA: BLADEPOINT on the RX 590

How many FPS does the RX 590 get in NARAKA: BLADEPOINT at 1080p?

The RX 590 averages 47 FPS in NARAKA: BLADEPOINT at 1080p on Ultra settings. Dropping to High takes it to around 61 FPS, and Low reaches roughly 104 FPS.

What about 1440p and 4K?

On Ultra, the RX 590 manages around 30 FPS at 1440p and around 12 FPS at 4K. Those are native figures: switching on AI upscaling lifts both considerably.

Can the RX 590 run NARAKA: BLADEPOINT at 60 FPS?

Not on Ultra — it averages below 60 FPS at every resolution. Dropping to Low at 1080p gets the RX 590 to about 104 FPS in NARAKA: BLADEPOINT, and AI upscaling helps close the gap to 60.

Do these NARAKA: BLADEPOINT figures include upscaling or ray tracing?

No. Every FPS figure on this page is native, with no AI upscaling and with ray tracing off. The RX 590 has no ray tracing hardware, so that option is off the table for this card.

How many FPS do I gain by turning on FSR in NARAKA: BLADEPOINT?

At 4K, FSR on Quality mode takes the RX 590 from around 12 native FPS to an estimated 17 FPS. Performance mode goes higher still, at the cost of some image sharpness.

What processor do I need to pair with the RX 590?

The figures on this page assume a Intel Core i5-13400, a mid-range processor that does not bottleneck the card. What matters with the RX 590 is that the CPU is not far below it: past that class, moving up a processor barely changes FPS at higher resolutions.

NARAKA: BLADEPOINT system requirements

Official minimum and recommended requirements published by the developer.

Minimum

CPUIntel i5 4th generation or AMD FX 6300 or equivalent

GPUNVIDIA GeForce GTX 750TI, Intel Arc A380, AMD HD 6950 or equivalent

RAM8 GB RAM

Storage55 GB available space

NARAKA: BLADEPOINT FPS with a RX 590 and a Intel Core i5-13400

Ultra

1080p

47FPS

min 41Acceptable

1440p

30FPS

min 27Acceptable

12FPS

min 11Unplayable

High

1080p

61FPS

min 54Good

1440p

40FPS

min 35Acceptable

16FPS

min 14Poor

Medium

1080p

80FPS

min 70Good

1440p

52FPS

min 46Acceptable

21FPS

min 19Poor

Low

1080p

104FPS

min 91Good

1440p

67FPS

min 59Good

27FPS

min 24Poor

Bottleneck (estimated)

1080pGPU 24%

1440pGPU 51%

4KGPU 80%

Quality	1080p (Full HD)	1440p (2K)	4K (Ultra HD)
Ultra	47FPS min 41Acceptable	30FPS min 27Acceptable	12FPS min 11Unplayable
High	61FPS min 54Good	40FPS min 35Acceptable	16FPS min 14Poor
Medium	80FPS min 70Good	52FPS min 46Acceptable	21FPS min 19Poor
Low	104FPS min 91Good	67FPS min 59Good	27FPS min 24Poor
Bottleneck (estimated)	GPU 24%	GPU 51%	GPU 80%

The percentage estimates how much of the stronger component's capability goes unused because of the other one.

FSR performance: FPS with AI upscaling

Resolution	Native	FSR Quality	FSR Performance
1080p	47	59	68
1440p	30	41	50
4K	12	17	22

About ray tracing: every figure on this page is with ray tracing off. The RX 590 has no dedicated hardware for it, so it is an option best left disabled.

Estimated figures. The real gain varies by game and by the version of the technology.

Frequently asked questions about NARAKA: BLADEPOINT on the RX 590

How many FPS does the RX 590 get in NARAKA: BLADEPOINT at 1080p?

The RX 590 averages 47 FPS in NARAKA: BLADEPOINT at 1080p on Ultra settings. Dropping to High takes it to around 61 FPS, and Low reaches roughly 104 FPS.

What about 1440p and 4K?

On Ultra, the RX 590 manages around 30 FPS at 1440p and around 12 FPS at 4K. Those are native figures: switching on AI upscaling lifts both considerably.

Can the RX 590 run NARAKA: BLADEPOINT at 60 FPS?

Not on Ultra — it averages below 60 FPS at every resolution. Dropping to Low at 1080p gets the RX 590 to about 104 FPS in NARAKA: BLADEPOINT, and AI upscaling helps close the gap to 60.

Do these NARAKA: BLADEPOINT figures include upscaling or ray tracing?

No. Every FPS figure on this page is native, with no AI upscaling and with ray tracing off. The RX 590 has no ray tracing hardware, so that option is off the table for this card.

How many FPS do I gain by turning on FSR in NARAKA: BLADEPOINT?

At 4K, FSR on Quality mode takes the RX 590 from around 12 native FPS to an estimated 17 FPS. Performance mode goes higher still, at the cost of some image sharpness.

What processor do I need to pair with the RX 590?