How Many FPS Does DOOM Eternal Get with RTX 3050? Performance at 1080p, 1440p & 4K

67FPS

1080p UltraEstimated

Affiliate link

Don't have DOOM Eternal yet?

Get it cheaper with an official key on Eneba.

View on Eneba →

amazonAffiliate link

Want the RTX 3050 at the best price?

Check the current price on Amazon.

View on Amazon →

DOOM Eternal system requirements

Official minimum and recommended requirements published by the developer.

Minimum

CPUIntel Core i5 @ 3.3 GHz or better, or AMD Ryzen 3 @ 3.1 GHz or better

GPUNVIDIA GeForce GTX 1050Ti (4GB), GTX 1060 (3GB), GTX 1650 (4GB) or AMD Radeon R9 280(3GB), AMD Radeon R9 290 (4GB), RX 470 (4GB)

RAM8 GB RAM

Storage80 GB available space

RTX 3050 Specifications

BrandNVIDIA

VRAM8 GB

Power Draw (TDP)130W

TierEntry-level

Benchmark33

1080p (Full HD)33/100

These are the basic specs. The full RTX 3050 page adds the rest of the technical data and its FPS game by game, not just in DOOM Eternal.

See all FPS and specs for the RTX 3050

Want the exact DOOM Eternal FPS with your RTX 3050?

These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.

Estimate tailored to your rig
Customize resolution, quality, and RAM

Calculate with my CPU & RAM

DOOM Eternal benchmark on RTX 3050: FPS by resolution and quality

What is your processor?

Pick yours and we recalculate the whole table above with it.

Intel Core i5-13400

Check Intel Core i5-13400 price →

DOOM Eternal FPS with a RTX 3050 and a Intel Core i5-13400

Ultra

1080p

67FPS

min 58Good

1440p

46FPS

min 40Acceptable

20FPS

min 18Poor

High

1080p

87FPS

min 76Good

1440p

59FPS

min 52Acceptable

26FPS

min 23Poor

Medium

1080p

114FPS

min 99Good

1440p

78FPS

min 68Good

34FPS

min 30Acceptable

Low

1080p

148FPS

min 129Excellent

1440p

101FPS

min 89Good

44FPS

min 39Acceptable

Bottleneck (estimated)

1080pbalanced

1440pGPU 27%

4KGPU 68%

Quality	1080p (Full HD)	1440p (2K)	4K (Ultra HD)
Ultra	67FPS min 58Good	46FPS min 40Acceptable	20FPS min 18Poor
High	87FPS min 76Good	59FPS min 52Acceptable	26FPS min 23Poor
Medium	114FPS min 99Good	78FPS min 68Good	34FPS min 30Acceptable
Low	148FPS min 129Excellent	101FPS min 89Good	44FPS min 39Acceptable
Bottleneck (estimated)	balanced	GPU 27%	GPU 68%

The percentage estimates how much of the stronger component's capability goes unused because of the other one.

This one does matter: from the Intel Core i5-12400F downwards the processor becomes the brake on the RTX 3050. There is 15% between the slowest and fastest CPU in the table. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.

DLSS performance: FPS with AI upscaling

Upscaling renders DOOM Eternal at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the RTX 3050 with DLSS enabled, starting from its native Ultra FPS.

Resolution	Native	DLSS Quality	DLSS Performance
1080p	67	84	97
1440p	46	62	76
4K	20	29	37

About ray tracing: every figure on this page is with ray tracing off. The RTX 3050 does have dedicated hardware for it, so you can turn it on in games that implement it. The FPS cost swings widely depending on how much ray tracing each title uses, and DLSS is exactly what people lean on to pay for it.

Estimated figures. The real gain varies by game and by the version of the technology.

Is the CPU or the graphics card holding you back?

These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.

The RTX 3050 and that processor are well matched in DOOM Eternal: neither clearly holds the other back, so the table figures are a fair reflection of the pair. At 4K it flips: there the graphics card becomes the limit.

The CheckFPS verdict

Analysis based on real in-game FPS, not spec sheets

Is the RTX 3050 Enough for DOOM Eternal?

The RTX 3050 delivers 67 FPS at 1080p Ultra in DOOM Eternal. Enough for a smooth 60 FPS experience. For 144Hz, lower the quality to High.

At 1440p it gets 46 FPS and at 4K 20 FPS at Ultra quality.

⚡ Optimization guide

Want more FPS in DOOM Eternal?

Our guide collects the settings that give between +40% and +90% FPS in DOOM Eternal with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.

View optimization guide for DOOM Eternal →

RTX 3050 or RTX 2060 Laptop for DOOM Eternal?

In DOOM Eternal at 1080p Ultra both land on the same figure: 67 FPS. Price and power draw are what separate them.

RTX 3050 vs RTX 2060 Laptop: which one is faster?

Other GPUs for DOOM Eternal

RX 5600 XTAMD 6GB

69FPS

1080p Ultra

View analysis Check price

GTX 1070 TiNVIDIA 8GB

67FPS

1080p Ultra

View analysis Check price

GTX 1660 SuperNVIDIA 6GB

67FPS

1080p Ultra

View analysis Check price

GTX 1660 TiNVIDIA 6GB

66FPS

1080p Ultra

View analysis Check price

GTX 1070NVIDIA 8GB

62FPS

1080p Ultra

View analysis Check price

GTX 1660NVIDIA 6GB

60FPS

1080p Ultra

View analysis Check price

If none of these convinces you for DOOM Eternal, the full ranking sorts all 143 cards by real FPS, not synthetic scores.

See the full graphics card ranking by real FPS

Other games with RTX 3050

Frequently asked questions about DOOM Eternal on the RTX 3050

How many FPS does the RTX 3050 get in DOOM Eternal at 1080p?

The RTX 3050 averages 67 FPS in DOOM Eternal at 1080p on Ultra settings. Dropping to High takes it to around 87 FPS, and Low reaches roughly 148 FPS.

What about 1440p and 4K?

On Ultra, the RTX 3050 manages around 46 FPS at 1440p and around 20 FPS at 4K. Those are native figures: switching on AI upscaling lifts both considerably.

Can the RTX 3050 run DOOM Eternal at 60 FPS?

Yes. On Ultra settings the RTX 3050 averages above 60 FPS in DOOM Eternal at 1080p. At higher resolutions you can claw back smoothness by lowering the preset or turning on upscaling.

Do these DOOM Eternal figures include upscaling or ray tracing?

No. Every FPS figure on this page is native, with no DLSS, FSR or XeSS, and with ray tracing off. The RTX 3050 can do both: upscaling pushes the frame rate up, ray tracing pulls it down.

How many FPS do I gain by turning on DLSS in DOOM Eternal?

At 4K, DLSS on Quality mode takes the RTX 3050 from around 20 native FPS to an estimated 29 FPS. Performance mode goes higher still, at the cost of some image sharpness.

What processor do I need to pair with the RTX 3050?

The figures on this page assume a Intel Core i5-13400, a mid-range processor that does not bottleneck the card. What matters with the RTX 3050 is that the CPU is not far below it: past that class, moving up a processor barely changes FPS at higher resolutions.

DOOM Eternal system requirements

Official minimum and recommended requirements published by the developer.

Minimum

CPUIntel Core i5 @ 3.3 GHz or better, or AMD Ryzen 3 @ 3.1 GHz or better

GPUNVIDIA GeForce GTX 1050Ti (4GB), GTX 1060 (3GB), GTX 1650 (4GB) or AMD Radeon R9 280(3GB), AMD Radeon R9 290 (4GB), RX 470 (4GB)

RAM8 GB RAM

Storage80 GB available space

DOOM Eternal FPS with a RTX 3050 and a Intel Core i5-13400

Ultra

1080p

67FPS

min 58Good

1440p

46FPS

min 40Acceptable

20FPS

min 18Poor

High

1080p

87FPS

min 76Good

1440p

59FPS

min 52Acceptable

26FPS

min 23Poor

Medium

1080p

114FPS

min 99Good

1440p

78FPS

min 68Good

34FPS

min 30Acceptable

Low

1080p

148FPS

min 129Excellent

1440p

101FPS

min 89Good

44FPS

min 39Acceptable

Bottleneck (estimated)

1080pbalanced

1440pGPU 27%

4KGPU 68%

Quality	1080p (Full HD)	1440p (2K)	4K (Ultra HD)
Ultra	67FPS min 58Good	46FPS min 40Acceptable	20FPS min 18Poor
High	87FPS min 76Good	59FPS min 52Acceptable	26FPS min 23Poor
Medium	114FPS min 99Good	78FPS min 68Good	34FPS min 30Acceptable
Low	148FPS min 129Excellent	101FPS min 89Good	44FPS min 39Acceptable
Bottleneck (estimated)	balanced	GPU 27%	GPU 68%

The percentage estimates how much of the stronger component's capability goes unused because of the other one.

DLSS performance: FPS with AI upscaling

Resolution	Native	DLSS Quality	DLSS Performance
1080p	67	84	97
1440p	46	62	76
4K	20	29	37

Estimated figures. The real gain varies by game and by the version of the technology.

Is the CPU or the graphics card holding you back?

These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.

Frequently asked questions about DOOM Eternal on the RTX 3050

How many FPS does the RTX 3050 get in DOOM Eternal at 1080p?

The RTX 3050 averages 67 FPS in DOOM Eternal at 1080p on Ultra settings. Dropping to High takes it to around 87 FPS, and Low reaches roughly 148 FPS.

What about 1440p and 4K?

On Ultra, the RTX 3050 manages around 46 FPS at 1440p and around 20 FPS at 4K. Those are native figures: switching on AI upscaling lifts both considerably.

Can the RTX 3050 run DOOM Eternal at 60 FPS?

Yes. On Ultra settings the RTX 3050 averages above 60 FPS in DOOM Eternal at 1080p. At higher resolutions you can claw back smoothness by lowering the preset or turning on upscaling.

Do these DOOM Eternal figures include upscaling or ray tracing?

No. Every FPS figure on this page is native, with no DLSS, FSR or XeSS, and with ray tracing off. The RTX 3050 can do both: upscaling pushes the frame rate up, ray tracing pulls it down.

How many FPS do I gain by turning on DLSS in DOOM Eternal?

At 4K, DLSS on Quality mode takes the RTX 3050 from around 20 native FPS to an estimated 29 FPS. Performance mode goes higher still, at the cost of some image sharpness.

What processor do I need to pair with the RTX 3050?