
How Many FPS Does Palworld Get with RX 6950 XT? Performance at 1080p, 1440p & 4K

Don't have Palworld yet?
From 28,99 € with an official key on Eneba.

Want the RX 6950 XT at the best price?
Check the current price on Amazon.
Palworld system requirements
Official minimum and recommended requirements published by the developer.
Minimum
Recommended
Upcoming games, cheaper with an official key.
Affiliate link
RX 6950 XT Specifications
These are the basic specs. The full RX 6950 XT page adds the rest of the technical data and its FPS game by game, not just in Palworld.
Want the exact Palworld FPS with your RX 6950 XT?
These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.
- Estimate tailored to your rig
- Customize resolution, quality, and RAM
Palworld benchmark on RX 6950 XT: FPS by resolution and quality
Pick yours and we recalculate the whole table above with it.
Palworld FPS with a RX 6950 XT and a Intel Core i5-13400
| Quality | 1080p (Full HD) | 1440p (2K) | 4K (Ultra HD) |
|---|---|---|---|
| Ultra | 149FPS min 90Excellent | 122FPS min 81Excellent | 69FPS min 60Good |
| High | 193FPS min 116Excellent | 158FPS min 104Excellent | 90FPS min 78Good |
| Medium | 253FPS min 153Excellent | 207FPS min 137Excellent | 118FPS min 103Good |
| Low | 327FPS min 197Excellent | 268FPS min 177Excellent | 153FPS min 133Excellent |
| Bottleneck (estimated) | CPU 46% | CPU 36% | balanced |
The percentage estimates how much of the stronger component's capability goes unused because of the other one.
This one does matter: from the Intel Core i9-14900K downwards the processor becomes the brake on the RX 6950 XT. There is 12% between the slowest and fastest CPU in the table. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.
FSR performance: FPS with AI upscaling
Upscaling renders Palworld at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the RX 6950 XT with FSR enabled, starting from its native Ultra FPS.
| Resolution | Native | FSR Quality | FSR Performance |
|---|---|---|---|
| 1080p | 149 | 186 | 216 |
| 1440p | 122 | 165 | 201 |
| 4K | 69 | 100 | 128 |
About ray tracing: every figure on this page is with ray tracing off. The RX 6950 XT does have dedicated hardware for it, so you can turn it on in games that implement it. The FPS cost swings widely depending on how much ray tracing each title uses, and FSR is exactly what people lean on to pay for it.
Estimated figures. The real gain varies by game and by the version of the technology.
Is the CPU or the graphics card holding you back?
These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.
With that CPU, the RX 6950 XT has headroom to spare in Palworld: the processor runs out before the graphics card does. A faster processor would gain you FPS; a stronger graphics card would barely help.
Is the RX 6950 XT Enough for Palworld?
The RX 6950 XT delivers 149 FPS at 1080p Ultra in Palworld. More than enough for 144Hz. You can comfortably play at 1440p.
At 1440p it gets 122 FPS and at 4K 69 FPS at Ultra quality.
This GPU is more than enough — you can play at 1440p or 4K comfortably
Want more FPS in Palworld?
Our guide collects the settings that give between +40% and +90% FPS in Palworld with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.
RX 6950 XT or RTX 3090 for Palworld?
In Palworld at 1080p Ultra both land on the same figure: 149 FPS. Price and power draw are what separate them.
RX 6950 XT vs RTX 3090: which one is faster?Other GPUs for Palworld
If none of these convinces you for Palworld, the full ranking sorts all 143 cards by real FPS, not synthetic scores.
See the full graphics card ranking by real FPS






















