
How Many FPS Does NARAKA: BLADEPOINT Get with Arc A770? Performance at 1080p, 1440p & 4K

Want the Arc A770 at the best price?
Check the current price on Amazon.
NARAKA: BLADEPOINT system requirements
Official minimum and recommended requirements published by the developer.
Minimum
Recommended
Upcoming games, cheaper with an official key.
Affiliate link
Arc A770 Specifications
These are the basic specs. The full Arc A770 page adds the rest of the technical data and its FPS game by game, not just in NARAKA: BLADEPOINT.
Want the exact NARAKA: BLADEPOINT FPS with your Arc A770?
These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.
- Estimate tailored to your rig
- Customize resolution, quality, and RAM
NARAKA: BLADEPOINT benchmark on Arc A770: FPS by resolution and quality
Pick yours and we recalculate the whole table above with it.
NARAKA: BLADEPOINT FPS with a Arc A770 and a Intel Core i5-13400
| Quality | 1080p (Full HD) | 1440p (2K) | 4K (Ultra HD) |
|---|---|---|---|
| Ultra | 84FPS min 62Good | 59FPS min 51Acceptable | 31FPS min 27Acceptable |
| High | 109FPS min 81Good | 77FPS min 67Good | 40FPS min 35Acceptable |
| Medium | 142FPS min 105Excellent | 100FPS min 87Good | 53FPS min 47Acceptable |
| Low | 184FPS min 137Excellent | 130FPS min 113Excellent | 68FPS min 60Good |
| Bottleneck (estimated) | CPU 22% | balanced | GPU 51% |
The percentage estimates how much of the stronger component's capability goes unused because of the other one.
This one does matter: from the AMD Ryzen 7 7800X3D downwards the processor becomes the brake on the Arc A770. There is 19% between the slowest and fastest CPU in the table. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.
XeSS performance: FPS with AI upscaling
Upscaling renders NARAKA: BLADEPOINT at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the Arc A770 with XeSS enabled, starting from its native Ultra FPS.
| Resolution | Native | XeSS Quality | XeSS Performance |
|---|---|---|---|
| 1080p | 84 | 105 | 122 |
| 1440p | 59 | 80 | 97 |
| 4K | 31 | 45 | 57 |
About ray tracing: every figure on this page is with ray tracing off. The Arc A770 does have dedicated hardware for it, so you can turn it on in games that implement it. The FPS cost swings widely depending on how much ray tracing each title uses, and XeSS is exactly what people lean on to pay for it.
Estimated figures. The real gain varies by game and by the version of the technology.
Is the CPU or the graphics card holding you back?
These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.
With that CPU, the Arc A770 has headroom to spare in NARAKA: BLADEPOINT: the processor runs out before the graphics card does. A faster processor would gain you FPS; a stronger graphics card would barely help. At 4K it flips: there the graphics card becomes the limit.
Is the Arc A770 Enough for NARAKA: BLADEPOINT?
The Arc A770 delivers 84 FPS at 1080p Ultra in NARAKA: BLADEPOINT. Enough for a smooth 60 FPS experience. For 144Hz, lower the quality to High.
At 1440p it gets 59 FPS and at 4K 31 FPS at Ultra quality.
Want more FPS in NARAKA: BLADEPOINT?
Our guide collects the settings that give between +40% and +90% FPS in NARAKA: BLADEPOINT with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.
Arc A770 or RTX 3060 for NARAKA: BLADEPOINT?
In NARAKA: BLADEPOINT at 1080p Ultra, the Arc A770 gets 84 FPS and the RTX 3060 87 FPS. The RTX 3060 is 4% ahead.
Arc A770 vs RTX 3060: which one is faster?Other GPUs for NARAKA: BLADEPOINT
If none of these convinces you for NARAKA: BLADEPOINT, the full ranking sorts all 143 cards by real FPS, not synthetic scores.
See the full graphics card ranking by real FPS



















