
How Many FPS Does Control Resonant Get with RX 6600? Performance at 1080p, 1440p & 4K

Don't have Control Resonant yet?
Get it cheaper with an official key on Eneba.

Want the RX 6600 at the best price?
Check the current price on Amazon.
Upcoming games, cheaper with an official key.
Affiliate link
RX 6600 Specifications
These are the basic specs. The full RX 6600 page adds the rest of the technical data and its FPS game by game, not just in Control Resonant.
Want the exact Control Resonant FPS with your RX 6600?
These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.
- Estimate tailored to your rig
- Customize resolution, quality, and RAM
Control Resonant benchmark on RX 6600: FPS by resolution and quality
Pick yours and we recalculate the whole table above with it.
Control Resonant FPS with a RX 6600 and a Intel Core i5-13400
| Quality | 1080p (Full HD) | 1440p (2K) | 4K (Ultra HD) |
|---|---|---|---|
| Ultra | 33FPS min 29Acceptable | 23FPS min 20Poor | 10FPS min 9Unplayable |
| High | 43FPS min 38Acceptable | 30FPS min 27Acceptable | 13FPS min 12Unplayable |
| Medium | 57FPS min 50Acceptable | 40FPS min 36Acceptable | 17FPS min 15Poor |
| Low | 73FPS min 65Good | 51FPS min 45Acceptable | 22FPS min 20Poor |
| Bottleneck (estimated) | GPU 47% | GPU 63% | GPU 84% |
The percentage estimates how much of the stronger component's capability goes unused because of the other one.
Almost any modern CPU performs the same here: there is only 0% between the slowest and the fastest in the table. If you were wondering whether to upgrade your processor for Control Resonant, it is not worth it. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.
FSR performance: FPS with AI upscaling
Upscaling renders Control Resonant at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the RX 6600 with FSR enabled, starting from its native Ultra FPS.
| Resolution | Native | FSR Quality | FSR Performance |
|---|---|---|---|
| 1080p | 33 | 41 | 48 |
| 1440p | 23 | 31 | 38 |
| 4K | 10 | 15 | 19 |
About ray tracing: every figure on this page is with ray tracing off. The RX 6600 does have dedicated hardware for it, so you can turn it on in games that implement it. The FPS cost swings widely depending on how much ray tracing each title uses, and FSR is exactly what people lean on to pay for it.
Estimated figures. The real gain varies by game and by the version of the technology.
Is the CPU or the graphics card holding you back?
These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.
Here the graphics card is the brake: the RX 6600 is what caps the frame rate in Control Resonant. A faster processor would hardly change the result.
Is the RX 6600 Enough for Control Resonant?
The RX 6600 delivers 33 FPS at 1080p Ultra in Control Resonant. Performance is acceptable but not ideal. Consider lowering the resolution or quality.
At 1440p it gets 23 FPS and at 4K 10 FPS at Ultra quality.
This GPU does not reach 60 FPS at 1080p Ultra
View recommended GPUs for Control Resonant→Want more FPS in Control Resonant?
Our guide collects the settings that give between +40% and +90% FPS in Control Resonant with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.
RX 6600 or RTX 2060 12GB for Control Resonant?
In Control Resonant at 1080p Ultra both land on the same figure: 33 FPS. Price and power draw are what separate them.
RX 6600 vs RTX 2060 12GB: which one is faster?Other GPUs for Control Resonant
If none of these convinces you for Control Resonant, the full ranking sorts all 143 cards by real FPS, not synthetic scores.
See the full graphics card ranking by real FPS



















