
How Many FPS Does Brawlhalla Get with RX 6600? Performance at 1080p, 1440p & 4K

Don't have Brawlhalla yet?
Get it cheaper with an official key on Eneba.

Want the RX 6600 at the best price?
Check the current price on Amazon.
Brawlhalla system requirements
Official minimum and recommended requirements published by the developer.
Minimum
Recommended
Upcoming games, cheaper with an official key.
Affiliate link
RX 6600 Specifications
Want the exact Brawlhalla FPS with your RX 6600?
These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.
- Estimate tailored to your rig
- Customize resolution, quality, and RAM
Brawlhalla benchmark on RX 6600: FPS by resolution and quality
Pick yours and we recalculate the whole table above with it.
Brawlhalla FPS with a RX 6600 and a Intel Core i5-13400
| Quality | 1080p (Full HD) | 1440p (2K) | 4K (Ultra HD) |
|---|---|---|---|
| Ultra | 45FPS min 40Acceptable | 32FPS min 28Acceptable | 13FPS min 12Unplayable |
| High | 59FPS min 52Acceptable | 41FPS min 36Acceptable | 17FPS min 15Poor |
| Medium | 77FPS min 68Good | 54FPS min 48Acceptable | 23FPS min 21Poor |
| Low | 100FPS min 88Good | 70FPS min 62Good | 30FPS min 27Acceptable |
| Bottleneck (estimated) | GPU 27% | GPU 49% | GPU 78% |
The percentage estimates how much of the stronger component's capability goes unused because of the other one.
This one does matter: from the AMD Ryzen 5 2600 downwards the processor becomes the brake on the RX 6600. There is 7% between the slowest and fastest CPU in the table. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.
FSR performance: FPS with AI upscaling
Upscaling renders Brawlhalla at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the RX 6600 with FSR enabled, starting from its native Ultra FPS.
| Resolution | Native | FSR Quality | FSR Performance |
|---|---|---|---|
| 1080p | 45 | 56 | 65 |
| 1440p | 32 | 43 | 53 |
| 4K | 13 | 19 | 24 |
About ray tracing: every figure on this page is with ray tracing off. The RX 6600 does have dedicated hardware for it, so you can turn it on in games that implement it. The FPS cost swings widely depending on how much ray tracing each title uses, and FSR is exactly what people lean on to pay for it.
Estimated figures. The real gain varies by game and by the version of the technology.
Is the CPU or the graphics card holding you back?
These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.
Here the graphics card is the brake: the RX 6600 is what caps the frame rate in Brawlhalla. A faster processor would hardly change the result.
Is the RX 6600 Enough for Brawlhalla?
The RX 6600 delivers 45 FPS at 1080p Ultra in Brawlhalla. Performance is acceptable but not ideal. Consider lowering the resolution or quality.
At 1440p it gets 32 FPS and at 4K 13 FPS at Ultra quality.
This GPU does not reach 60 FPS at 1080p Ultra
View recommended GPUs for Brawlhalla→Want more FPS in Brawlhalla?
Our guide collects the settings that give between +40% and +90% FPS in Brawlhalla with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.
























