
How Many FPS Does Tony Hawk's Pro Skater 3 + 4 Get with RX 6650M? Performance at 1080p, 1440p & 4K

Don't have Tony Hawk's Pro Skater 3 + 4 yet?
Get it cheaper with an official key on Eneba.

Want the RX 6650M at the best price?
Check the current price on Amazon.
Tony Hawk's Pro Skater 3 + 4 system requirements
Official minimum and recommended requirements published by the developer.
Minimum
Recommended
Upcoming games, cheaper with an official key.
Affiliate link
RX 6650M Specifications
Want the exact Tony Hawk's Pro Skater 3 + 4 FPS with your RX 6650M?
These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.
- Estimate tailored to your rig
- Customize resolution, quality, and RAM
Tony Hawk's Pro Skater 3 + 4 benchmark on RX 6650M: FPS by resolution and quality
Pick yours and we recalculate the whole table above with it.
Tony Hawk's Pro Skater 3 + 4 FPS with a RX 6650M and a Intel Core i5-13400
| Quality | 1080p (Full HD) | 1440p (2K) | 4K (Ultra HD) |
|---|---|---|---|
| Ultra | 67FPS min 54Good | 48FPS min 42Acceptable | 20FPS min 18Poor |
| High | 87FPS min 71Good | 62FPS min 54Good | 26FPS min 23Poor |
| Medium | 114FPS min 93Good | 81FPS min 71Good | 34FPS min 30Acceptable |
| Low | 148FPS min 120Excellent | 105FPS min 92Good | 44FPS min 39Acceptable |
| Bottleneck (estimated) | CPU 10% | GPU 24% | GPU 68% |
The percentage estimates how much of the stronger component's capability goes unused because of the other one.
This one does matter: from the Intel Core i5-13400 downwards the processor becomes the brake on the RX 6650M. There is 23% between the slowest and fastest CPU in the table. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.
FSR performance: FPS with AI upscaling
Upscaling renders Tony Hawk's Pro Skater 3 + 4 at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the RX 6650M with FSR enabled, starting from its native Ultra FPS.
| Resolution | Native | FSR Quality | FSR Performance |
|---|---|---|---|
| 1080p | 67 | 84 | 97 |
| 1440p | 48 | 65 | 79 |
| 4K | 20 | 29 | 37 |
About ray tracing: every figure on this page is with ray tracing off. The RX 6650M does have dedicated hardware for it, so you can turn it on in games that implement it. The FPS cost swings widely depending on how much ray tracing each title uses, and FSR is exactly what people lean on to pay for it.
Estimated figures. The real gain varies by game and by the version of the technology.
Is the CPU or the graphics card holding you back?
These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.
With that CPU, the RX 6650M has headroom to spare in Tony Hawk's Pro Skater 3 + 4: the processor runs out before the graphics card does. A faster processor would gain you FPS; a stronger graphics card would barely help. At 4K it flips: there the graphics card becomes the limit.
Is the RX 6650M Enough for Tony Hawk's Pro Skater 3 + 4?
The RX 6650M delivers 67 FPS at 1080p Ultra in Tony Hawk's Pro Skater 3 + 4. Enough for a smooth 60 FPS experience. For 144Hz, lower the quality to High.
At 1440p it gets 48 FPS and at 4K 20 FPS at Ultra quality.
Want more FPS in Tony Hawk's Pro Skater 3 + 4?
Our guide collects the settings that give between +40% and +90% FPS in Tony Hawk's Pro Skater 3 + 4 with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.
























