
How Many FPS Does Slay the Spire 2 Get with RX 6600? Performance at 1080p, 1440p & 4K

Don't have Slay the Spire 2 yet?
Get it cheaper with an official key on Eneba.

Want the RX 6600 at the best price?
Check the current price on Amazon.
Slay the Spire 2 system requirements
Official minimum and recommended requirements published by the developer.
Minimum
Recommended
Upcoming games, cheaper with an official key.
Affiliate link
RX 6600 Specifications
Want the exact Slay the Spire 2 FPS with your RX 6600?
These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.
- Estimate tailored to your rig
- Customize resolution, quality, and RAM
Slay the Spire 2 benchmark on RX 6600: FPS by resolution and quality
Pick yours and we recalculate the whole table above with it.
Slay the Spire 2 FPS with a RX 6600 and a Intel Core i5-13400
| Quality | 1080p (Full HD) | 1440p (2K) | 4K (Ultra HD) |
|---|---|---|---|
| Ultra | 216FPS min 114Excellent | 128FPS min 81Excellent | 44FPS min 39Acceptable |
| High | 281FPS min 148Excellent | 167FPS min 106Excellent | 57FPS min 50Acceptable |
| Medium | 368FPS min 194Excellent | 218FPS min 138Excellent | 74FPS min 65Good |
| Low | 476FPS min 251Excellent | 282FPS min 178Excellent | 96FPS min 84Good |
| Bottleneck (estimated) | CPU 59% | CPU 41% | GPU 28% |
The percentage estimates how much of the stronger component's capability goes unused because of the other one.
This one does matter: from the Intel Core i9-14900K downwards the processor becomes the brake on the RX 6600. There is 11% between the slowest and fastest CPU in the table. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.
FSR performance: FPS with AI upscaling
Upscaling renders Slay the Spire 2 at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the RX 6600 with FSR enabled, starting from its native Ultra FPS.
| Resolution | Native | FSR Quality | FSR Performance |
|---|---|---|---|
| 1080p | 216 | 270 | 313 |
| 1440p | 128 | 173 | 211 |
| 4K | 44 | 64 | 81 |
About ray tracing: every figure on this page is with ray tracing off. The RX 6600 does have dedicated hardware for it, so you can turn it on in games that implement it. The FPS cost swings widely depending on how much ray tracing each title uses, and FSR is exactly what people lean on to pay for it.
Estimated figures. The real gain varies by game and by the version of the technology.
Is the CPU or the graphics card holding you back?
These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.
With that CPU, the RX 6600 has headroom to spare in Slay the Spire 2: the processor runs out before the graphics card does. A faster processor would gain you FPS; a stronger graphics card would barely help. At 4K it flips: there the graphics card becomes the limit.
Is the RX 6600 Enough for Slay the Spire 2?
The RX 6600 delivers 216 FPS at 1080p Ultra in Slay the Spire 2. More than enough for 144Hz. You can comfortably play at 1440p.
At 1440p it gets 128 FPS and at 4K 44 FPS at Ultra quality.
This GPU is more than enough — you can play at 1440p or 4K comfortably
Want more FPS in Slay the Spire 2?
Our guide collects the settings that give between +40% and +90% FPS in Slay the Spire 2 with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.
























