
How Many FPS Does Slay the Spire 2 Get with Arc A580? Performance at 1080p, 1440p & 4K

Don't have Slay the Spire 2 yet?
Get it cheaper with an official key on Eneba.
Want the Arc A580 at the best price?
Check the current price on Amazon.
Slay the Spire 2 system requirements
Official minimum and recommended requirements published by the developer.
Minimum
Recommended
Upcoming games, cheaper with an official key.
Affiliate link
Arc A580 Specifications
Want the exact Slay the Spire 2 FPS with your Arc A580?
These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.
- Estimate tailored to your rig
- Customize resolution, quality, and RAM
Slay the Spire 2 benchmark on Arc A580: FPS by resolution and quality
Pick yours and we recalculate the whole table above with it.
Slay the Spire 2 FPS with a Arc A580 and a Intel Core i5-13400
| Quality | 1080p (Full HD) | 1440p (2K) | 4K (Ultra HD) |
|---|---|---|---|
| Ultra | 179FPS min 100Excellent | 109FPS min 73Good | 42FPS min 37Acceptable |
| High | 233FPS min 130Excellent | 142FPS min 95Excellent | 55FPS min 48Acceptable |
| Medium | 304FPS min 169Excellent | 185FPS min 123Excellent | 72FPS min 63Good |
| Low | 394FPS min 219Excellent | 240FPS min 160Excellent | 93FPS min 82Good |
| Bottleneck (estimated) | CPU 54% | CPU 35% | GPU 32% |
The percentage estimates how much of the stronger component's capability goes unused because of the other one.
This one does matter: from the Intel Core i9-14900K downwards the processor becomes the brake on the Arc A580. There is 13% between the slowest and fastest CPU in the table. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.
XeSS performance: FPS with AI upscaling
Upscaling renders Slay the Spire 2 at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the Arc A580 with XeSS enabled, starting from its native Ultra FPS.
| Resolution | Native | XeSS Quality | XeSS Performance |
|---|---|---|---|
| 1080p | 179 | 224 | 260 |
| 1440p | 109 | 147 | 180 |
| 4K | 42 | 61 | 78 |
About ray tracing: every figure on this page is with ray tracing off. The Arc A580 does have dedicated hardware for it, so you can turn it on in games that implement it. The FPS cost swings widely depending on how much ray tracing each title uses, and XeSS is exactly what people lean on to pay for it.
Estimated figures. The real gain varies by game and by the version of the technology.
Is the CPU or the graphics card holding you back?
These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.
With that CPU, the Arc A580 has headroom to spare in Slay the Spire 2: the processor runs out before the graphics card does. A faster processor would gain you FPS; a stronger graphics card would barely help. At 4K it flips: there the graphics card becomes the limit.
Is the Arc A580 Enough for Slay the Spire 2?
The Arc A580 delivers 179 FPS at 1080p Ultra in Slay the Spire 2. More than enough for 144Hz. You can comfortably play at 1440p.
At 1440p it gets 109 FPS and at 4K 42 FPS at Ultra quality.
This GPU is more than enough — you can play at 1440p or 4K comfortably
Want more FPS in Slay the Spire 2?
Our guide collects the settings that give between +40% and +90% FPS in Slay the Spire 2 with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.
























