
How Many FPS Does Dead by Daylight Get with GTX 1070? Performance at 1080p, 1440p & 4K

Don't have Dead by Daylight yet?
Get it cheaper with an official key on Eneba.

Want the GTX 1070 at the best price?
Check the current price on Amazon.
Dead by Daylight system requirements
Official minimum and recommended requirements published by the developer.
Minimum
Recommended
Upcoming games, cheaper with an official key.
Affiliate link
GTX 1070 Specifications
These are the basic specs. The full GTX 1070 page adds the rest of the technical data and its FPS game by game, not just in Dead by Daylight.
Want the exact Dead by Daylight FPS with your GTX 1070?
These FPS assume a reference CPU. Add your real processor and RAM and we'll tailor the estimate to your rig.
- Estimate tailored to your rig
- Customize resolution, quality, and RAM
Dead by Daylight benchmark on GTX 1070: FPS by resolution and quality
Pick yours and we recalculate the whole table above with it.
Dead by Daylight FPS with a GTX 1070 and a Intel Core i5-13400
| Quality | 1080p (Full HD) | 1440p (2K) | 4K (Ultra HD) |
|---|---|---|---|
| Ultra | 94FPS min 67Good | 63FPS min 55Good | 28FPS min 25Poor |
| High | 122FPS min 86Excellent | 82FPS min 71Good | 36FPS min 32Acceptable |
| Medium | 160FPS min 113Excellent | 107FPS min 93Good | 47FPS min 42Acceptable |
| Low | 207FPS min 146Excellent | 138FPS min 120Excellent | 61FPS min 54Good |
| Bottleneck (estimated) | CPU 28% | balanced | GPU 56% |
The percentage estimates how much of the stronger component's capability goes unused because of the other one.
This one does matter: from the AMD Ryzen 7 9800X3D downwards the processor becomes the brake on the GTX 1070. There is 20% between the slowest and fastest CPU in the table. One caveat: this is at 1080p, where the CPU weighs most. At 1440p and 4K the graphics card takes over and the processor stops mattering.
FSR performance: FPS with AI upscaling
Upscaling renders Dead by Daylight at a lower internal resolution and reconstructs the image, so you trade a little sharpness for extra frames. These are the estimated figures for the GTX 1070 with FSR enabled, starting from its native Ultra FPS.
| Resolution | Native | FSR Quality | FSR Performance |
|---|---|---|---|
| 1080p | 94 | 118 | 136 |
| 1440p | 63 | 85 | 104 |
| 4K | 28 | 41 | 52 |
About ray tracing: every figure on this page is with ray tracing off. The GTX 1070 has no dedicated hardware for it, so it is an option best left disabled.
Estimated figures. The real gain varies by game and by the version of the technology.
Is the CPU or the graphics card holding you back?
These FPS assume a mid-range CPU that isn't a bottleneck — roughly a Intel Core i5-13400 — and 16 GB of RAM.
With that CPU, the GTX 1070 has headroom to spare in Dead by Daylight: the processor runs out before the graphics card does. A faster processor would gain you FPS; a stronger graphics card would barely help. At 4K it flips: there the graphics card becomes the limit.
Is the GTX 1070 Enough for Dead by Daylight?
The GTX 1070 delivers 94 FPS at 1080p Ultra in Dead by Daylight. Enough for a smooth 60 FPS experience. For 144Hz, lower the quality to High.
At 1440p it gets 63 FPS and at 4K 28 FPS at Ultra quality.
Want more FPS in Dead by Daylight?
Our guide collects the settings that give between +40% and +90% FPS in Dead by Daylight with barely any visual loss. Recommended settings, GPU-specific tips (NVIDIA/AMD/Intel) and solutions to common game issues.
GTX 1070 or RX 6600M for Dead by Daylight?
In Dead by Daylight at 1080p Ultra, the GTX 1070 gets 94 FPS and the RX 6600M 104 FPS. The RX 6600M is 11% ahead.
GTX 1070 vs RX 6600M: which one is faster?Other GPUs for Dead by Daylight
If none of these convinces you for Dead by Daylight, the full ranking sorts all 143 cards by real FPS, not synthetic scores.
See the full graphics card ranking by real FPS

















